PM-1340GT Main Features
  • Highest Quality Lathe, Made in TAIWAN
  • Large 1-9/16” Spindle Bore clear through spindle for
    through-headstock work
  • Extremely Short Spindle Length, only 14", perfect for
    gun barrel work through the headstock
  • Power feed on Carriage, and Cross Slide, both left and right,
    and in and out, for both turning and facing operations with
    automatic feed. Allows for the best surface finish in all
    directions.
  • Induction Hardened and Precision Ground Bed Ways to
    resist wear and give a long service life
  • All gears and shafts in headstock hardened and precision
    ground for long life and extremely quiet running
  • Removable Gap for larger diameter work
  • High quality electronics used throughout machine
  • Slip Clutch on feed rod, to help prevent overloading damage
    of feeds and allow the use of a micro carriage stop for
    repetitive work
  • Precision Tapered Roller Bearings used in spindle, for
    the ultimate in long life, high precision, and best
    surface finishes. Guaranteed Run Out +/- .0001" for
    ultimate precision
  • Inch AND Metric thread cutting ability is a standard feature
  • True INCH PITCH main lead screw, cross feed, and
    compound lead screws  make it easy to use for the INCH
    measurement System, yet still has the Metric readings on
    dials for the ultimate in versatility for any job that may come
    about
  • Splash oil bath lubrication in Headstock, and Apron, for
    efficient lubrication, and long life, yet simple and reliable,
    and does not require any filter changes or pump
    maintenance as with oil pump lubrication systems. Also no
    risk of losing oil flow to expensive parts as there can be with
    pump lubricated systems
  • Only Extremely High Precision Spindle Bearings are used,
    FAG, NSK, NTN, or NACHI
  • Locking Tang in tail stock is provided
  • Longest Warranty Available, 5 Years!
Email sales@machinetoolonline.com or call 412-787-2876 for your immediate needs!
Please Click on all Images Below for Larger View
Quality Machine Tools
sales@machinetoolonline.com :Email
412-787-2876 :or call
for your immediate needs!
PM-1340GT Very High Precision Gunsmith
& Professional Toolroom Lathe
Made in Taiwan - Scroll Down For Complete Pricing & More Information

IN STOCK as of February 15, 2017 for immediate shipment
Click here for a Printable PDF Full Spec Sheet and Quotation With Pricing
High Quality, Professional Lathe
Extremely High Quality Fit and Finish
throughout machine
Easy To Use Controls, Designed With
The Operator In Mind
Engraved Degree Markings For
Compound Are Marked All The Way
To 60 Degrees, Specifically To Thread
On 29.5 Degrees Without Other
Measuring Tools Needed For Set Up
Extremely Quiet Running Headstock,
Because Of Very Tight Gear
Tolerances
Hardened & Precision Ground Gears,
And Notice The Very Wide Headstock
Gears For A Machine Of This Size
For Extra Heavy Duty Cutting And
Long Life
NO GEAR CHANGES To Set All Inch
Threads, And All Inch Feeds. Minimal
Gear Changes Needed For Metric
Threads Only
Very Short Headstock, Perfect For
Barrel Work. Only 14" From Chuck
Mounting Surface To End Of Spindle, It
Is The Shortest One Around!
Extra Heavy Spindle Wall For More
Rigidity
(Shown with end cover removed)
Extra Heavy Tailstock Quill, For More
Rigidity When Drilling, Boring, And
Turning With A Center
Optional Heavy Gage Welded Steel
Base With Cabinet Storage, Not Made
Of Thin Sheet Metal
Leveling Bolts Provided. Base Is Very
Thick Steel For Rigid Mounting And
Less Vibration
Base Price $4,699.00! This quality is unheard of at this price!

PM-1340GT Lathe, With Base Accessory Package          $4699.00
PM-1340GT Lathe With Preferred Equipment Package  $5299.00
Stand is optional at $499.00 (Welded Steel)
Cast Iron Stand $1499.00 (100% Made in USA)
Click here for a Printable PDF Full Spec Sheet and Quotation With Pricing, Including
Optional Accessories And Package Details
Flat Rate of $299 Shipping Anywhere In the 48 US States, $399 Shipping To Most Locations In
Canada. $49 for liftgate if needed
IN STOCK as of February 22 2017 for immediate shipment
PREFERED PACKAGE NOW WITH UPGRADED CHUCK, HIGH PRECISION .0012 3
Jaw with bolt on top jaws, High Precision 4 jaw chuck available (Optional)
Click Here for Manual and Parts List