Main Specifications PM-932M:
- Table Size: 9"x31.5"
- Max. Table Load Capacity: 300 lbs
- Table T-Slot Size and Number: 14mm / 9/16", 3 Slots
- Table Travel, X Axis: 22-3/8" Hand Only, 19.5" w/ Power Feed
- Table Surface Height from floor, 34-3/4" (With base flat on
- Base Dimension at floor approx. 18-5/8"W x 27"D
- Normal Working Max Height: (top of column travel motor) 76-1/2"
- Height with head all the way up: (top of main motor) 81-1/2"
- Stand (Base) height, to machine mounting surface: 24"
- Cross Travel, Y Axis: 8"
- Head Vertical Travel: 17"
- Max. Distance Spindle to Table: 18"
- Quill (Spindle) Travel: 5"
- Lead Screw Type: Inch Pitch Acme Threads
- Spindle Taper: R-8, with 7/16-20 drawbar thread (U.S.
- Quill Diameter: approx. 3"
- Head Tilt Front to Back: N/A
- Head Swivel: Side To Side, 90 Degrees
- Ram Swivel: N/A
- Power: 220 Volt, Single Phase, 9 Amps
- Motor Horsepower: 1.5 H.P. (Some other similar machines will say
that they are 2HP, but its the SAME exact motor as this one, just rounded
up to 2hp and marked that way, we prefer to be honest and mark it as
what it really is, which is 1.5HP, which is more than enough power for
this machine either way)
- Casting Type: Fine Grain Cast Iron
- Approximate Weight: 1100lbs with Base, 850 Without Base
- Comes Standard with Quill Depth DRO, R8 Spindle Taper, different packages available to meet user's
- Class 5 high precision spindle bearings
- Generous table size and travel in a compact machine
- Solid Dovetail Way Column for high rigidity and precise up and down movements
- Easy speed changes, no need to open any covers and change belts, just stop, flip a lever, and go.
- Very Solid cast iron head and body make deeper cuts no problem
- Head tilts 90 degrees left and right for angled cutting
- Oil Filled gearbox in head for long life
- All Steel Gears in head for long life, NO PLASTIC GEARS
- Adjustable tapered gibs and backlash to keep the machine tight and accurate
- 3 Year Warranty (Longest warranty out there on this type of machine)
PKG Option Includes:
- 4" Milling Vise with Swivel Base
- 11pc. Precision R-8 Collet Set (.0005 TIR)
- 52 Pc. Clamping / Hold Down Set
|Already Own This Machine?
Below is a link to help you with setting up and
using your new lathe or milling machine.
Add Milling Package:
4" Milling Vise with Swivel
11pc. Precision R-8 Collet
Set (.0005 TIR)
52 Pc. Clamping / Hold Down
ES-12 DRO Display
3 YEAR WARRANTY
Control Panel ( Also Shown
with optional ES-12 DRO)